ACS713-BRD: CURRENT SENSING BOARD FOR HALL-EFFECT (5 TO 30 A / UNI OR BIDIRECTIONAL) ALLEGRO SENSORS

Price ARS: -
Price USD: 16
Stock: 8
Buy

Price

(*) Depends on installed sensor – Reference Price with ACS714-05 Bidirectional (5A) is usd 16,00 +taxes / freight; also bare board available. Call for availability and qty. discounts.

Datasheet

LyR_SensorCorriente_HojaDatos_v3a.pdf (PDF, Sp)

Description

Reduced dimension board (25.4 x 44 mm), designed for deployment of ACS71X line of Allegro Microsystems Hall-effect current sensors, SOIC8 formats for currents from 5 to 30 A. The connection diagram (see datasheet) is shown on the Datasheet. Current exchange is performed through a triple B3AZ (16 A each) terminal block, and the board uses two-sided copper surfaces for adequate conduction. Typical components used are Cfi = 0.01uF, Cp = 0.1uF (Ceramic disk PTH, 50V), for ACS713-30A. Sensors require + 5Vcc regulated power (+3.3 Vcc in ACS759), and signal and power lines are accessed through a 4 pin , 100 mil SIP4 connector (J_out in diagram).
Río Gallegos, Santa Cruz - República Argentina